Battery charger for TEMO·1000

The 110–230 V battery charger is specifically designed for TEMO·1000 motors and is initially supplied with the purchase of your motor. With a power output of 205 watts, the charger consumes approximately 5 Ah at 220 V AC for a full charge of the battery in around 5 hours. With this charger (input: 110–240 V; output: 54.6 V), you can recharge your TEMO·1000 from a standard mains socket (220 V).

Usage advice:
Before connecting your battery, make sure to use the charger in a well-ventilated area and do not cover either the battery or the charger to avoid overheating during charging. Ensure that you connect the cable to the battery before plugging it into the mains. Note that the TEMO·1000 battery charging connector is waterproof and IP67 certified. However, always check that the connector is dry and that the charger itself is not wet before charging to prevent any risk of short-circuit or sparks.

When charging is complete after approximately 5 hours (if the battery is fully empty), the charger indicator light changes from red (charging) to green, indicating that your TEMO·1000 is fully charged. You can monitor the charging progress using the indicator lights located on top of the battery. Once charging is complete, all lights turn green.

To unplug the charger, first remove the mains plug, then the connector attached to the battery.